|
A.1 Regulations |
|
|
14 CFR part 21 |
Certification procedures for products and Parts |
|
14 CFR part 23 |
Airworthiness standards: Normal Category Airplanes |
|
14 CFR part 25 |
Airworthiness standards: Transport Category Airplanes |
|
14 CFR part 27 |
Airworthiness standards: Normal category rotorcraft |
|
14 CFR part 29 |
Airworthiness standards: Transport category rotorcraft |
|
14 CFR part 43 |
Maintenance preventive maintenance rebuilding and alteration |
|
14 CFR part 145 |
Repair stations |
|
A.2 Advisory Circulars |
|
|
AC 20-115D |
Airborne Software Development Assurance Using EUROCAE ED-12 and RTCA DO-178() |
|
AC 20-128A |
Design Considerations for Minimizing Hazards caused by Uncontained Turbine Engine and Auxiliary Power Unit Rotor Failure |
|
AC 20-135 |
Powerplant Installation and Propulsion System Component Fire Protection Test Methods Standards and Criteria |
|
AC 20-136B |
Aircraft Electrical and Electronic System Lightning Protection |
|
AC 20-152 |
RTCA Inc. Document RTCA/DO-254 Design Assurance Guidance for Airborne Electronic Hardware |
|
AC 20-158A |
The Certification of Aircraft Electrical and Electronic Systems for Operation in the High intensity Radiated Fields (HIRF) Environment |
|
AC 21-16G |
RTCA Document DO-160 versions D/ E/ F and G “Environmental Conditions and Test Procedures for Airborne Equipment” |
|
AC 23.1309-1E |
System Safety Analysis and Assessment for Part 23 Airplanes |
|
AC 23-17C |
Systems and Equipment Guide for Certification of Part 23 Airplanes and Airships |
|
AC 25.1309-1A |
System Design and Analysis |
|
AC 25-16 |
Electrical Fault and Fire Prevention and Protection |
|
AC 25-1581-1 |
Airplane Flight Manual |
|
AC 27-1B |
Certification of Normal Category Rotorcraft |
|
AC 29-2C |
Certification of Transport Category Rotorcraft |
|
AC 43.13-1B |
Acceptable Methods Techniques and Practices-Aircraft Inspection and Repairs |
|
AC 43.13-2A |
Acceptable Methods Techniques and Practices-Aircraft Alterations |
|
AC 120-16 |
Air Carrier Maintenance Programs |
|
AC 120-42A |
Extended Range Operation with Two Engine Airplanes (ETOPS) |
|
A.3 Orders and Handbooks |
|
|
FAA Order 8110.4C |
Type Certification |
|
FAA Order 8110.42 |
Parts Manufacturer Approval Procedures |
|
FAA Order 8110.54 |
Instructions for Continued Airworthiness Responsibilities Requirements and Content |
|
|
FAA Aircraft Materials (www.fire.tc.faa.gov) |
|
|
Fire Test Handbook (Aircraft Materials Fire Test Handbook) |
|
A.4 Other |
|
|
DOT/FAA/AR-04/26 |
Flammability Assessment of Bulk-Packed Non-rechargeable Lithium Primary Batteries in Transport Category Aircraft June 2004 |
|
A.5 Industry Documents |
|
|
SAE ARP 4754 |
Guidelines for Development of Civil Aircrafts and Systems |
|
SAE ARP 4761 |
Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment |
|
RTCA DO-178C |
Software Considerations in Airborne Systems and Equipment Certification |
|
RTCA DO-254 |
Design Assurance Guidance for Airborne Electronic Hardware |
|
RTCA DO-227A |
Minimum Operational Performance Standards for Non-Rechargeable Lithium Batteries dated September 2017 |
|
RTCA DO-160G |
Environmental Conditions and Test Procedures for Airborne Equipment |